Vacuum Cleaner Maintenance - The Only 10 Tips You Need

Modern Vacuum Cleaners are more effective than ever, and are available from many brands, and even different colours these days.

Here are 10 tips for keeping your vacuum cleaner in full working order.

1. Different styles of cleaner, such as upright, cylinder and hand held vacuums are designed to be used in specific circumstances. Whilst a hand held vacuum cleaner is ideal for cleaning upholstery or car interiors, it is probably not the best way to clean an office block, or a hotel. An upright cleaner might be ideal for cleaning large areas, but it might be slightly heavier and a bit less manoeuvrable than a cylinder cleaner. Make sure that you're not expecting too much from your vacuum cleaner, and that you're not over working it.

2. Each and every cleaner needs to be looked at now again to make sure that everything is working as it should and that there is no damage to it. After all, prevention is better than cure. Also, make sure that you have spare bags and filters so that if you do need to replace them, you won't have to trail around town looking for the right parts.

3. A lot of problems with cleaners can be down to user error. Remember to read the manufacturer's handbook for assistance with checking and replacing filters and bags, and what to do if your vacuum cleaner stops working.

4. Check for blockages on the brush bar, and in the pipe, and remember not to try and pick up large objects with your vacuum cleaner.

5. One reason for a loss of suction and so poor performance is a cracked hose. Check to make sure that your hose isn't damaged, and if it is, replace it.

6. If there's a burning smell whilst you are using your vacuum, then it could be that there's a problem with overheating. Make sure the filters are clean, and if that doesn't sure it, it could be a motor problem, and the motor might need replacing.

7. Vacuums sometimes cut out for no reason. This is often due to a power cable problem. The cable maybe cracked or damaged. It's much better to replace the cable than try to repair it.

8. There are a wide range of vacuum accessories to fit most models, so you don't need to place an undue strain on your vacuum cleaner or yourself. If you need a longer hose or power cable, or different tools for cleaning those hard to reach places, you're better off buying the right tools, rather than stretching to reach them yourself.

9. You can usually fit replacement parts yourself, so you don't need to take your vacuum cleaner to an expensive local dealer, or send it back to the manufacturer to get it working again.

10. By treating your cleaner to new parts when it needs them, and long lasting can breathe new life into a vacuum, and ensure that it works as it should for years to come. Instead of buying a new vacuum cleaner when the filters are blocked or the hose is cracked, repair it! You'll be saving money, time and the environment.

Now you know more about vacuum cleaner maintenance, and how you can prolong the life of yours, what's stopping you from getting the vacuum cleaner spares parts and accessories you need today?